Affect of pouring temperature on volume deficit of US 413
DOI:
https://doi.org/10.26438/ijcse/v6i5.11471150Keywords:
Volume deficit, pouring temperature, Macro cavities, Internal porosity, Surface sinks, Volumetric contraction, Al-Si alloyAbstract
US 413 (Al-12Si) alloy volume deficit characteristic has been studied in this paper. Influence of pouring temperature on volume deficit is studied and latter is addition of Macro cavities, Internal porosity, Surface sink and Volumetric contraction. The decrease in definite volume of molten metal leads to volume deficit in castings, and it can be envisaged as a casting defect. Volume deficit of a casting depends on casting material and casting conditions. Influence of pouring temperature and casting shape on the volume deficit characteristics are studied in this paper. Increase in pouring temperature lowers the rate of heat extraction by the mould thereby reducing volume deficit.
References
ASM Metals Handbook Volume 15, Casting, ASM International, The Materials Information Company, 2004
Thoguluva Raghavan Vijayaram, “Mechanical property investigation of LM6 alloy castings manufactured with the aid of casting solidification simulation technology”, Indian Foundry Journal, Vol.51, No.11, November 2005, pp. 30-34
Richard W Heine, Carl R Loper, Jr and Philip C Rosenthal, Principles of Metal Casting, Tata McGraw Hill Publisher Company
Mollard, F:R, Flemmings M.C., and Nyama E.F.; “Understanding aluminium fluidity: the key to advanced cast products”, AFS Trans (1987), vol. 95, pp. 647-652
S.Sundarrajan, H.Md. Roshan, E.G. Ramachandran, “Studies on shrinkage characteristics of binary Mg-Al alloys”, Transactions of The Indian Institute of Metals, Vol.37, No.4, August 1984
P.Kumar, J.L.Gaindhar, “Effect of process variables on surface finish and soundness of Al-11%Si alloy V-Process castings”, AFS transactions, 96-159, pp.1143-1149,1997
John Campbell and Richard A. Harding, “TALAT Lecture 3206, The Feeding of Castings, IRC in Materials”, The University of Birmingham, EAA - European Aluminium Association,1994
Feeding mechanisms in casting, Journal of Cast Metals Research, Vol.5, p.1, 1969
P.Kumar, J.L.Gaindhar, Effect of process variables on surface finish and soundness of Al-11%Si alloy V-Process castings, AFS transactions, 96-159, pp.1143-1149,1997
Shuyong Dongy, Shoumei Xiong and Baicheng Liu, Numerical Simulation of Microporosity Evolution of Aluminum Alloy Castings, J. Mater. Sci. Technol., Vol.20 No.1, 2004, pp.23-26
Foseco Non-Ferrous Foundry man’s Handbook, Eleventh edition, Revised and edited by, John R. Brown, Butterworth Heinemann publisher, 2008
A.S. Bochvar, O.S. Zhadaeva, Theory of shrinkage phenomena in alloys, Liteinsedelo No.5, 1941
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.
