Optimized Power Flow Analysis of IEEE 14 Bus System Using Matlab

Authors

  • Hazarika S EE Department, GIMT, Azara, India

DOI:

https://doi.org/10.26438/ijcse/v7i6.12001203

Keywords:

14 bus system, power flow, optimization

Abstract

For proper planning and operation of power system and economic scheduling of generating units, power flow analysis plays a vital role. It is performed to have clear knowledge regarding bus voltage magnitude and angle and line flows. A number of methods are being used all over the world for power flow analysis. Newton Raphson method, Gauss Seidal method, fast decoupled load flow methods are a few to name. Now days, various soft computing techniques are adopted by researchers as well as practicing engineers for load flow analysis to cater various needs of the research institutes and the utilities. Every method has got advantages as well as disadvantages. The objective of this paper is to develop an user friendly software to perform load flow analysis for IEEE 14 bus system. Optimization of IEEE 14 bus sytem has been performed using Particle Swarm Optimization Technique. The software will be helpful for researchers, practicing engineers, students of power system of various levels to carry out power flow quickly and efficiently as per their requirement. The software is developed using MATLAB programming.

References

[1] N. Usha, “Simulation results of eight bus system using pushpull inverter base STATCOM”, Journal of Theoretical and Applied Information Technology, 2005 - 2009 JATIT.

[2] C. R. Feurte – Esquivel and E. Acha `A Newton-type algorithm for the control of power flow in electrical power networks," IEEE Transactions on Power Systems, Vol.12,

Nov.1997.

[3] Rohit Kapahi, “Load flow analysis of 132 KV substation using ETAP software”, International Journal of Scientific & Engineering Research Volume 4, Issue 2, February- 2013,ISSN 2229-5518

[4] A. J. Wood, B. F. Wollenberg. Power Generation Operation and Control. 2nd ed. John Willey & Sons Inc

[5] D.I.Sun, B.Ashley, B.Brewer, A.Hughes and W.F.Tinney, “Optimal Power Flow by Newton Approach”, IEEE Transactions on Power Apparatus and systems, vol.103, No.10, 1984, pp2864-2880.

[6] Mr. Rudresh. B. Magadum, Mr. Tejaswi. M. Timsani, “Minimization of Power Loss in Distribution Networks by Different Technology”, International Journal of Scientific & Engineering Research Volume 3, Issue 5, 2012

[7] P. V. V. Rama Rao and S. Sivanagaraju, “Radial istribution NetworkReconfiguration for Loss Reduction and Load Balancing using Plant Growth Simulation Algorithm”, International Journal on Electrical Engineering and Informatics - Volume 2, Number 4, 2010

[8] Ajinkya Pachghare , R.M.Sahare, “Voltage regulation and reactive power compensation by SSSC based on 48-pluse GTO (VSC)”, ISROSET, Vol.5, Issue.4, pp.41-44, August (2017)

[9] D.D. Bhale, R.B. Jain, “Performance Analysis of Hybrid Cognitive Gaussian Relay Channels”, IJSRNSC, Volume-5, Issue-2, May 2017.

Downloads

Published

2019-06-30
CITATION
DOI: 10.26438/ijcse/v7i6.12001203
Published: 2019-06-30

How to Cite

[1]
S. Hazarika, “Optimized Power Flow Analysis of IEEE 14 Bus System Using Matlab”, Int. J. Comp. Sci. Eng., vol. 7, no. 6, pp. 1200–1203, Jun. 2019.

Issue

Vol. 7 No. 6 (2019): IJCSE June Edition

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.