Cost Efficiency for Load Devices Based on IOT
DOI:
https://doi.org/10.26438/ijcse/v7i6.918921Keywords:
energy efficient, Internet of Things, Device Profile Web Service, automation, Key Performance Indicators, Web Services, Service Oriented ArchitectureAbstract
Internet of Things or IoT is an interconnected network of physical devices connected to each other through the internet. The ‘things’ here refer to the physical object in the network that has its own unique IP address and has the ability to send and receive data over the network. It is a growing topic of interest these and will deeply affect our daily life. This thesis work aims to apply the IoT paradigm for controlling and monitoring of a smart lighting application. The implementation aims to reduce the energy consumption in addition to, achieve adaptability of the lights according to the surrounding environment. The implementation uses Service Oriented Architecture (SOA) to allow heterogeneity and interoperability between components.
References
[1] “Energy efficient Europe,” 22 June 2011. [Online]. Available: http://ec.europa.eu/news/energy/110622_en.htm [Accessed 22 August 2013].
[2] Aalto University School of Science and Technology, Guidebook on Energy Efficient Electric Lighting for Buildings, Raisio: IEA publications, 2010.
[3] European Research Projects on the Internet of Things (CERP-IoT), “Internet of Things -Strategic Research Roadmap,” 2009.
[4] R. Melfi, B. Rosenblum, B. Nordman, and K. Christensen, “Measuring building occupancy using existing network infrastructure,” in Green Computing Conference and Workshops (IGCC), 2011 International, July 2011, pp. 1–8.
[5] V. L. Erickson, M. A. Carreira-Perpi ´ n˜an, and A. E. Cerpa, “Occupancy ´ modeling and prediction for building energy management,” ACM Transactions on Sensor Networks (TOSN), vol. 10, no. 3, pp. 42, 2014.
[6] RF-based user location and tracking system,” proceedings of the IEEE, vol. 97, no. 3, pp. 482, 2009.
[7] M. Shur and A. Zukauskas, “Solid-State Lighting: Toward Superior Illumination,” Proceedings of the IEEE, vol. 93, no. 10, pp. 1693-1695, 2005.
[8] JUNCTIONS,” Appl. Phys. Lett., vol. 1, no. 4, pp. 82-83, 1962
[9] S. Kunić and Z. Šego, “OLED technology and displays,” in ELMAR, Zadar, 2012
[10] N. Bardsley, “OLED vs LED lighting: Is there room for OLED lighting?,” 29 May 2013. [Online]. Available: http://www.idtechex.com/research/articles/ole
D vs led lighting is there room for oled lighting-00005477.asp. [Accessed 1 November 2013].
[11] M. Miki, T. Hiroyasu and K. Imazato, “Proposal for an intelligent lighting system, and verification of control method
[12] K. Chintalapudi, A. Padmanabha Iyer, and V. N. Padmanabhan, “Indoor localization without the pain,” in Proceedings of the
[13] M. Youssef and A. Agrawala, “The Horus WLAN location determination system,” in Proceedings of the 3rd International Conference on Mobile Systems, Applications, and Services, ser. MobiSys ’05. New York, NY, USA: ACM, 2005, pp. 205–218. [Online]. Available: http://doi.acm.org/10.1145/1067170.1067193
[14] I. Guvenc, C. T. Abdallah, R. Jordan, and O. Dedeoglu, “Enhancements to RSS based indoor tracking systems using Kalman filters,in Proc. Global Signal Processing Expo (GSPx), Dallas, TX, Mar 2003
[15] Azevedo, M. G. Morgan and F. Morgan, “The Transition to Solid-State Lighting,” proceedings of the IEEE, vol. 97, no. 3, pp. 482, 2009.
[16] R. Karlicek, “Smart lighting - more than illumination,” in Asia Communications and Photonics Conference (ACP), Guangzhou, 2012.
[17] Siddiqui, A. Ahmad, H. K. Yang and C. Lee, “ZigBee based energy efficient outdoor lighting control system,” in 14th International Conference on Advanced Communication Technology (ICACT), Pyeong Chang, 2012.
[18] L. V. Popa and I. Finis, “The Design of a Street Lighting Monitoring and Control System,” in International Conference and Exposition on Electrical and Power Engineering (EPE), Iasi, 2012.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.
