Simulation and Designing of Network Signal Booster at 900 MHz

Authors

  • Saksham Jain Dept. of EECE DIT University, Dehradun, UK, India
  • Vikrant Saini Dept. of EECE DIT University, Dehradun, UK, India
  • Brajlata Chauhan Dept. of EECE DIT University, Dehradun, UK, India

Keywords:

Amplifier, noise figure, Low noise Stability, Impedance matching

Abstract

The primary aim of this paper is to present simulation findings and design network signal booster at a frequency of 900 MHz RF. The booster is designed to work on GSM system bandwidth. The gain given by the amplifier circuit was 12dB at the middle frequency with a difference of +-1.3 dB to normalize. The monopole antennas used for signal reception and transmission that have 0.9141-1315i input impedance and -18.18dB return loss. The study includes detailed graphical and tabular view of the results at each design level, simulation.

References

[1] Adegoke, A. S., Babalola, I. T., & Balogun, W. A. (2008). Performance evaluation of GSM mobile system in Nigeria. Pacific Journal of Science and Technology, 9(2), 436–441.

[2] Bhole, Y., Chaugule, S., Damankar, B., & Yadav, V. (2015). ENERGY HARVESTING FROM RF SIGNAL, 4(3), 985–989.

[3] Domine Leenaerts, Jos Bergervoet, Jan-Willem Lobeek,MarekSchmidtSzalowski“900MHz/1800MHz GSM BaseStation LNA with Sub-1dB Noise Figure and +36dBm OIP3”NXP Semiconductors, Eindhoven, 5656AE, the Netherlands

[4] J. Millman and A. Grabel, Microelectronics, 2nd ed. New York: Mc Graw-Hill, 1988.

[5] Guolin Sun; Rolf H. Jansen. Broadband Doherty Power Amplifier via Real Frequency Technique. IEEE Transactions on Microwave Theory and Techniques. 2012, 60, pp.99-111.

[5] Haiying Huang. Broadband electrical impedance matching for piezoelectric ultrasound transducers, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 2011, 58,

pp.2699-2707.

[6] Jianfei An and shuangxi Zhang”A New Method of designing electrical impedance matching network for Piezo elctric ultrasound transducer”, Journal of Engineering science and technology review7 (1)(2004)71-75

[7] Mayank B. Thacker, Shrikant S. Bhoyar , Praveen Kumar Rahangdale” Broadband CMOS LNA Design and Performance Evaluation”, pp. (14-19) Sept. 2013

[8] Khatri R, Mishra D. K. and Jain P., “A Low Power Low Noise Amplifier for Ultra Wideband Applications”, IEEE conference on Communication systems and Network Technologies, pp 600-605, May 2012.

[9] Youming Zhang, Xusheng Tang and Dawei Zhao, “A 0.7–9GHz CMOS broadband high amplifier for multi-band use”, IEEE inter conference on Microwave and Millimeter technology, May 2012.

[10] Khatri R, Mishra D. K. and Jain P., “A Low Power Low Noise Amplifier for Ultra Wideband Applications”, IEEE conference on Communication systems and Network Technologies, pp 600-605, May 2012.

[11] S. Jing,, Y. Yin, A. Sun, , Y. Wei,, & Y. Yang,.” Compact E-shaped monopole antenna for dual-band WLAN applications”. IEEE International Conference (ICMTCE), pp. 305-308, May. 2011

[12] K. P. Ray and Y. Ranga, “Printed Rectangular Monopole Antennas,” Proc. IEEE Antennas and Propagation Society International Symposium, July 2006, pp.1693-1696.

[13]Aleksandar Tasić."Performance Parameters of RF Circuits", Analog Circuits and Signal Processing Series, 2006

Downloads

Published

2020-05-31

How to Cite

[1]
S. Jain, V. Saini, and B. Chauhan, “Simulation and Designing of Network Signal Booster at 900 MHz”, Int. J. Comp. Sci. Eng., vol. 8, no. 5, pp. 48–52, May 2020.

Issue

Vol. 8 No. 5 (2020): IJCSE May Edition

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.