Novel Approach of IC-Based User Defined Temperature Control System
Keywords:
Temperature measurement, IC-based temperature sensors, MicrocontrollerAbstract
Temperature is one of the most important process variables which are required to be measured and as well as controlled in the field of different process industries. So, accurate and reliable measurement of temperature is always treated as one of the most essential requirements in any process industry. The main objective of this work is to design and implement an automated user-defined temperature control system using the IC-based temperature sensor and embedded system. In order to control the temperature of a system in a very compact way,the temperature window should be user-defined. An automatic temperature controlling system is a device that helps keep the temperature of a particular region within a defined temperature window. A temperature window selects the range of temperature where the lower limit and the upper limit of the temperature is user-defined. This means the temperature window within which the temperature is to be maintained purely depends on the user. Any time the user can change the set temperature range accordingly. It is generally used for measurement as well as controlling the temperature within the range of -55oC to 150oC.
References
[1] B. G. Liptak, “ Process Measurement and Analysis”, 3rd ed. Oxford, U.K.: Butterworth Heinman, 1999.
[2] D. M. Considine, “ Process Instruments and Control Hand Book”, 2nded. New York: McGraw-Hill, 1974.
[3] E. O. Doeblin, “ Measurement System Application and Design”, 4thed. New York: McGraw-Hill, 1990.
[4] Kenneth J. Ayala, “ The 8051 Microcontroller”, Cengage Learning, 2004.
[5] C.Rameshu, A.P. Shivaprasad, “Microprocessor-based temperature indicator using thermocouple as the sensor”, Journal of The Indian Institute of Science, Vol. 68, No. 9&10, pp. 395-409, 1988.
[6] Theophilus Wellem, Bhudi Setiawan, “A Microcontroller- based Room TemperatureMonitoring System”, International Journal of Computer Applications, Vol. 53, No.1, 2012.
[7] M. Rehman, M. Abdul Mujeebu, T.B. Kheng, B.A.J.A. Abu Izneid, “A Microprocessor-Based Novel Instrument for Temperatureand Thermal Conductivity Measurements”, Experimental Techniques, Springer, Vol. 36, Issue 5, pp. 62–70, 2012.
[8] A.K. Sanyal, A. Pal, “A Microprocessor-Based Temperature Monitoringand Control System”, IETE Journal of Education, Volume 26, Issue 4, Pages 150-156, 2015.
[9] Trio Adiono, Maulana Yusuf Fathany, SyifaulFuada, Irfan GaniPurwanda, SinantyaFerantiAnindya, “A Portable Node of Humidity and TemperatureSensor for Indoor Environment Monitoring”, 3rdInternational Conference on Intelligent Green Building and Smart Grid (IGBSG), IEEE, DOI: 10.1109/IGBSG.2018.8393575, 2018.
[10] T. O. Loup, M. Torres, F. M. Milian, P. E. Ambrosio, “Bluetooth Embedded System for Room-Safe Temperature Monitoring”, IEEE Latin America Transactions, Vol. 9, Issue 6, pp. 911-915, DOI: 10.1109/TLA.2011.6096971, 2011.
[11] Adeloye, M.Y, Kotoye, A.A, Idris, O.Y, Egbedele, I.A., “Construction of A Temperature Controlled Fan Using AMicroprocessor”, American Journal of Engineering Research (AJER), Vol. 6, Issue 9, pp. 324-328, 2017.
[12] Zhang Xiaodong, Zhang Jie, “Design and Implementation of Smart Home Control System Based on STM32”, Chinese Control and Decision Conference (CCDC), IEEE, pp. 3023-3027, DOI: 10.1109/CCDC.2018.8407643, 2018.
[13] Sun Kai, Liu Xin-Sheng, Xia Kui-Liang, “Design and Research of intelligent Temperature Control deviceBased on Microprocessor”, Fourth International Conference on Instrumentation and Measurement, Computer, Communication and Control, IEEE, pp. 256-259, DOI: 10.1109/IMCCC.2014.60, 2014.
[14] Peng Wang, “Design of Temperature and Humidity Intelligent Control System Based on C8051F”, Proceedings of International Conference on Electronics and Optoelectronics, IEEE, pp. V3-63-V3-66, DOI: 10.1109/ICEOE.2011.6013301, 2011.
[15] Baruah.J, Islam.B, “Microcontroller Based Temperature Monitoring andControlling System”, International Journal of Advanced Information Science and Technology (IJAIST), Vol.26, No26, pp. 117-121, 2014.
[16] Reetam Mondal, Sagarika Pal, “Microcontroller Based Temperature Monitoringand Closed Loop Control to Study the Reactionof Controlled Variable with Respect to Load Changes”, Sensors & TransducersJournal, Vol. 153, Issue 6, pp. 148-154, 2013.
[17] A Dmodar, T. Rajagopalan, “Microprocessor Based ProgrammableTemperature Control System”, IETE Journal of Research, Vol. 29, Issue 4, pp. 179-180, 2015.
[18] C. Rameshu, A. P. Shivaprasad, “Microprocessor-based temperature indicator using athermistor as the sensor”, JournalInternational Journal of Electronics, Vol. 63, Issue 3, pp. 425-434, 2007.
[19] C. Rameshu, A. P. Shivaprasad, “Microprocessor-based temperature indicator usingplatinum resistance as the sensor”, Journal International Journal of Electronics, Vol. 63, Issue 6, pp. 891-903, 2007.
[20] D. Hazarika, K. C. Sarma, and P. K. Sarmah, “Microprocessor-Based Temperature MonitoringSystem Using Optical Fibers”, IEEE Sensors Journal, Vol. 9, No. 9, pp. 1025-1028, 2009.
[21] Vaibhav Bhatia, Gavish Bhatia, “Room Temperature based Fan Speed Control Systemusing Pulse Width Modulation Technique”, International Journal of Computer Applications, Vol 81, No. 5, pp. 35-40,2013.
[22] MinliTang,Hengyu Wu,Baoru Han, “The Design and facture of a Digital temperature controller Based on 78F9234 SingleChip”, The 2nd International Conference on Computer and Automation Engineering (ICCAE), Vol. 2, pp. 597-599, DOI: 10.1109/ICCAE.2010.5451682, 2010.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.
