I2SPhybrid pulse shape: Modified I2SP pulse by using weighting technique and it’s impact on SC-FDMA system

Authors

  • G Bhandari ICFAI Tech School, ICFAI University, Dehradun, India
  • S Vijay gaurav.bhandari0071@gmail.com

Keywords:

pulse shape, ISP, OBR, SC-FDMA, companding

Abstract

Pulse shaping plays a crucial role in spectral shaping in the modern wireless communication to reduce the spectral bandwidth. Pulse shaping is a spectral processing technique by which fractional out of band power is reduced for low cost, reliable, power and spectrally efficient mobile radio communication systems. The Multipath channel has two main considerations spectral efficient transmission and reduced ISI both these requirement of Spectral efficient transmission and reduced ISI are satisfied by pulse shaping the transmitted signal. I2SPhybrid pulse shape introduced in this research work by using weighting techniques has better spectral characteristics and shows improved OBR performance when used with SC-FDMA system.

References

H.G. Myung, J. Lim, and D.J. Goodman, Peak-to-Average Power Ratio of Single Carrier FDMA Signals with Pulse Shaping, 17th Annual IEEE International Symposium on Personal, Indoor and Mobile RadioCommunications (PIMRC „06), Helsinki, Finland, Sep. 2006.

H. G. Myung, J. Lim, & D. J. Goodman, “Single Carrier FDMA for Uplink Wireless Transmission,” IEEE Vehic. Tech. Mag., vol. 1,no. 3, Sep. 2006.

B. Gaffney, A. D. Fagan, “ WALSH HADAMARD TRANSFORMPRECODED MB-OFDM: AN IMPROVED HIGH DATA RATE ULTRAWIDEBAND SYSTEM”, The 17th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC‟06),2006.

Ishu,” PAPR Reduction in Wavelet based SCFDMA using Pulse Shaping Filters for LTE Uplink Transmission”, International Journal of Applied Engineering Research, Volume 9, Number 20, 2014, pp. 6481-6492.

Faisal S. Al-Kamali, Bassiouny M. Sallam, Farid Shawki,” A New Single Carrier FDMA System Based On The Discrete Cosine Transform”, IEEE International Conference Computer Engineering & Systems, ICCES 2009, pp 555 – 56

Li Peng, Yu Zhu, Zongxin Wang, Naibo Wang, Peak-to-Average Power Ratio of SC-FDMA Systems with Localized Subcarrier Mapping,Global Mobille Congress (GMC), 2010,pp 1-6..

T. Frank, A. Klein and E. Costa, IFDMA - a scheme combining theadvantages of OFDMA and CDMA," Special Issue on "Next GenerationCDMA vs. OFDMA for 4G Wireless Applications" IEEE Wireless Communications Magazine, 2007.

Divyangna Gandhi, Shilpi Gupta, Upena Dalal, Implementation of Pulse Shaping Techniques in OFDM System, International Journal of Computer Applications (0975 – 8887) Volume 68– No.10, April 2013.

A S KNG, Vishal Sharma, Data Communication using Pulse Shaping techniques in wireless signal processing approach-In depth review, International Journal of Computational Engineering & Management, Vol. 12, April 2011.

A. S Kang , Vishal Sharma, Pulse Shape Filtering in WirelessCommunication-A Critical Analysis, (IJACSA) International Journal of Advanced Computer Science and Applications,Vol. 2, No.3, March 2011.

G. Bhandari, S. Vijay, “An Improved pulse shape combined with companding transform to optimize SC-FDMA performance”, International Journal of Computer Science and Information Security (IJCSIS), Vol. 14, No. 11, November 2016, pp 461-470

Downloads

Published

2025-11-11

How to Cite

[1]
G. Bhandari and S. Vijay, “I2SPhybrid pulse shape: Modified I2SP pulse by using weighting technique and it’s impact on SC-FDMA system”, Int. J. Comp. Sci. Eng., vol. 5, no. 6, pp. 85–89, Nov. 2025.

Issue

Section

Research Article