Analyzing various approaches for Measurement of Solar PV Potential through Urban Built Form Geometry modifications
Keywords:
Irradiance, Energy output, Solar PV Potential, Solar Radiation, Urban Built Form GeometryAbstract
In India fossil fuel are depleting fast due to ever rising population, over-exploitation, besides increasing the environmental cost. Conventional thermal power has some demerits due to the depletion of recourses, pollution, etc. Society is shifting from agricultural to Industrial / Commercial based , with modern lifestyle which leads to urbanization .Since land area is fixed multistoried buildings are growing fast. The demand for electrical energy is also increasing rapidly. This calls for other form of energy generation, especially through renewable resources. India is privileged with its geographical position closed to equator and has almost 300 days with 10hours solar irradiance with average value of 1335W/m2. So the urban planning with utilization of solar panels need to be incorporated together to reduce energy consumption and save fuel for the future generations. This huge amount of solar resource potential gets wasted which can be utilized by urban built form geometry modifications taking the building shape and density aspects and implementing solar panels on the roof of the buildings also. The design need to be done in a way so that maximum solar potential can be utilized and shadows due to other buildings are avoided. The main aim of this research work is to analyze various methods for calculating the solar PV potential and measure the potential of solar photovoltaic capacity..
References
Souvik Ganguli, Sunanda Sinha, Assessment of Solar Photovoltaic Generation Potential & Estination of Possible Plant Capacity for 100m2 Available Area in Kolkata,Journal of engineering Research and Studies, E-ISSN 0976-7916.
Beckman, J., Duffie, W. (1991). Solar engineering of thermal processes. New York: Whiley.
IEA-PVPS (2014). Trends 2014 in Photovoltaic Applications.http://www.iea-pvps.org/index.php?
IEA-SHC (2015). International Energy Agency - Solar Heating and Cooling Programme.http://iea-shc.org/
Gomes, J., Diwan, L., Bernardo, R., Karlsson, B. (2013). Minimizing the Impact of Shading at Oblique Solar Angles in a Fully Enclosed Asymmetric Concentrating PVT Collector.2013 ISES Solar World Congress, Energy Procedia 57, 2176-2185.
Kanters, J., Davidsson, H. (2014). Mutual shading of PV modules on flat roofs: a parametric study. 2013 ISES Solar World Congress, Energy Procedia 57, 1706-1715.
NREL (2015). System Advisor Model (SAM).https://sam.nrel.gov/.
R Compagnon, Solar and Daylight Availability in the Urban Fabric, University of Applied Science of Western Switzerland (HES-SO), Ecoled’ingenieurs at d’ architects de Fribourg, 80 Bd. De Perolles,1705 Fribourg Switzerland.
Christoph F Reinhart, TimurDogan, J AlstanJakubiec, TarekRakha and Andrew Sang,UMI- an Urban simulation Environment for Building,MassachusettsInstitute of Technology of Technology, Department of Architecture, Cambridge, MA 02139, USA.use
Timur Dogan1, Prof. Christoph Reinhart2 , and Panagiotis Michalatos1, URBAN DAYLIGHT SIMULATION CALCULATING THE DAYLIT AREA OF URBAN DESIGNS 1 Harvard Graduate School of Design, Cambridge, MA 2 Massachusetts Institute of Technology, Cambridge, MA www.urbandaylight.de
Vicky Cheng1 , Koen Steemers1 , Marylene Montavon2 and Raphaël Compagnon3 Urban Form, Density and Solar Potential, 1 Department of Architecture, The Martin Centre, University of Cambridge, UK 2 Solar Energy and Building Physics Laboratory (LESO-PB), EcolePolytechniqueFédérale de Lausanne, Switzerland 3 University of Applied Sciences of Western Switzerland, Ecoled'Ingénieurs et d'Architectes de Fribourg, Switzerland.
MihailTodorov, Implementation of Solar Energy in Urban Planning(Analysis of SAFAR as a solar potential Metric & Improvement of simulation Tools, , Master Thesis in Energy Efficient and Environmental Building faculty of Engineering, Lund University.
O’Brien, W., Kennedy1, C., Athienitis, A. and Kesik, T. (2010) The relationship between personal net energy use and the urban density ofsolar buildings.Environment
and Planning B: Planning and Design 37(6), 1002 – 1021.
Larsvall, M., Teder, M., Engdahl, B., Carlsson, C. (2010). ReflexioneröverStadsplaneringensVardagsfrågor. Malmö: Malmö stad.
Álvarez, J. R. (2013). Energy and urban form: A top-down assessment tool. Munich: PLEA2013.
MihailTodorov, Implementation of Solar Energy in Urban Planning(Analysis of SAFAR as a solar potential Metric & Improvement of simulation Tools, , Master Thesis in Energy Efficient and Environmental Building faculty of Engineering, Lund University.(page 17).
D.P.Kothari, K.C. Singal, Rakesh Ranjan, Renewable Energy Sources and Emerging Technologies,(Page54-55)
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.
