Design and Development of Smart Switching System for Controlling Home Appliances

Authors

  • Dogra S Department of Electronics and Communications Engineering, Meghnad Saha Institute of Technology, Kolkata, India
  • Sen S Department of Electronics and Communications Engineering, Meghnad Saha Institute of Technology, Kolkata, India
  • Langal K Department of Electronics and Communications Engineering, Meghnad Saha Institute of Technology, Kolkata, India

Keywords:

89C52 Microcontroller, DTMF Decoder, GSM Module, Optoisolator, Triac

Abstract

The world is changing day by day. We are moving from analog to digital system in almost every field. If we say for example, our old Television system has now been replaced by digital Television system. Even our cellular phones are becoming smarter. To make our home smarter and digital there are several projects going on. In this work we have designed & developed a prototype for home automation where one can control, monitor and remotely access their home appliances. In this project we have replaced our old switches used in switch board by digital keys. One can control their home appliances even they are not present in their home by their mobile phone and can also get the status of the appliances and power, through their mobile phone. This system will not only give the control of their home appliances, it will also make home smarter digital system and help peoples to keep away from electric shock.

References

SIM900:

http://probots.co.in/Manuals/SIM900%20GSM%20Modem%20-%20Starter%20Guide.pdf

SIM900 AT Commands Manual: www.propox.com/download/docs/SIM900_AT.pdf

89C52 Datasheet with Instruction Set: http://www.atmel.com/images/doc0313.pdf

DTMF Decoder: www.ece.usu.edu/ece_store/spec/HT9170.pdf

Optoisolator: kubuntu.free.fr/wiki/data/fp/moc3041.pdf

Triac:

www.nxp.com/documents/data_sheet/ BT136_SERIES.pdf

Downloads

Published

2025-11-11

How to Cite

[1]
S. Dogra, S. Sen, and K. Langal, “Design and Development of Smart Switching System for Controlling Home Appliances”, Int. J. Comp. Sci. Eng., vol. 4, no. 6, pp. 36–40, Nov. 2025.