Computational Science of Vapor Liquid Two Phase Flow Inside Heat Exchanger Tube
Keywords:
Vapor liquid two phase flow Homogeneous Model, set of nonlinear equations, finite difference method, MATLAB programAbstract
A heat exchanger is one of the key components in air-conditioning and refrigeration systems. Condensers and evaporators are typically heat exchangers which are used to condense vapors into liquid and evaporate liquid into vapor respectively also known as phase transition. To obtain the dynamic performance of the heat exchanger system, simulation in transient state is required. For prediction of such performance a homogeneous vapor liquid two phase flow model is used. To obtain the solution of the model science of the computations need to be used efficiently. In the present paper an efficient computational model and method are proposed. The method is capable of predicting the refrigerant temperature distribution, velocity of refrigerant, tube wall temperature as a function of position and time. A single tube heat exchanger with refrigerant R22 as working fluid was chosen as a sample and some tests were carried out to determine its transient response. The examination of results indicates that the computational model provides a reasonable prediction of dynamic response.
References
G. F. Hewitt, Hemisphere Handbook of Heat Exchanger Design. Hemisphere Publishing Corporation, New York (1990).
Wang H. & Touber S., 1991, “Distributed and non-steady-state modelling of an air cooler”, International Journal of Refrigeration, Vol. 12.
Notes on Fundamentals of Multiphase flow, Prof. Michael L. Corradini, Department of Engineering Physics, University of Wisconsin, Madison WI 53706.
Bird, R.B., Stewart, W.E., and Lightfoot, E.N., Transport Phenomena, John Wiley and Sons, 2nd edition, New York, NY, 2002.
M. Turaga, S. Lin and P. P. Fazio, Performance of direct expansion plate finned tube coils for air cooling and dehumidifying coils. Int. J. Refrig. 11, 78-86 (1988).
J. C. Chen, A correlation for boiling heat transfer to boiling fluids in convective flow. ASME Paper 63-34 11, 78-86 (1963).
W. Roetzel, Y. Xuan, Dynamic Behaviour of Heat Exchangers, Computational Mechanics Publications, WIT Press, 1999.
H. P. Williams, P. F. Brian, A. T. Saul and T. V. Williams, Numerical Recipes--The Art of Scientific Computing. Cambridge University Press, Cambridge (1986).
Palen, J.W., Breber, G., Taborek, J., 1979. Prediction of flow regimes in horizontal tube side condensation. Heat Transfer Eng. 1, 47–57.
Dobson M.K. and Chato J.C., 1998, “Condensation in Smooth Horizontal Tubes”, ASME Journal of Heat Transfer, Vol.120, No.1, pp.193-213.
Xia J., Zhou X., Jin X. & Zhou Z, 1999, “Dynamic simulation of superheat at the evaporator outlet of the air conditioner with inverter”, Proc. 20th International Congress of Refrigeration, Sydney, Paper No. 561.
J.L. Xu, P. Cheng, T.S. Zhao, Gas liquid two-phase flow regimes in rectangular channels with mini/micro gaps, International Journal of Multiphase Flow 25 (1999) 411-432.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit and that in the event of reuse or distribution, the terms of this license are made clear.
